Ultralight MT ZOOM 25mm offset/layback carbon seat posts. Full High Modulus UD carbon with titanium bolts. Universal, fine for mtb, road, CX/Gravel etc.
NOTE: these posts now have stealth black logos/decals (not the older silver design shown.
Thoroughly tested to EN standards and on the trail. No rider weight limit. Has extra support for carbon rail seats. Fits oval and round rails.
Long 420mm length, can be easily cut to save extra weight.
27.2 x 420mm 172g
31.6 x 420mm 189g
2 year guarantee.
No rider weight limit.
[split]
Features:
– 25mm Offset/Layback/Setback etc
– Long at 420mm – you can to your length preference & save weight (e.g. 70mm cut off the 31.6mm post drops 15g)
– Lightweight lower carbon fibre rail seat post clamp
– Supportive upper aluminium rail clamps (good for carbon seat post rails … note the best direction for clamping in photo of saddle rails)
– Supplied with spare bolt & carbon paste (Use the carbon paste on the lower section of the post in the frame to eliminate slippage).
– Sealed at top of seat post (so no water ingress into frame)
– Measuring height markings, silver logos
[split]
Use the carbon paste on the lower section of the post in the frame to eliminate slippage. Also it can be helpful to put some on your seat post rails and on & under the lower clamping bowl. A small tub is supplied.
Take note the best direction for clamping in the photo of saddle rails, the supportive aluminium rail clamping part is best pointing inwards.
There is no specific torque recommendation for the bolts. Tighten them to the point where you feel confident nothing will slip, but not crazy tight. Common sense here.
The minimum insertion from the bottom of the post into your frame is 10cm. There is no maximum insertion limit from the top.